What affects changes in water balance

Poolsupply4less Moorpark ,  CA 
 Knowing what triggers water imbalance will reduce your swimming pool surprises. 
 Balanced water chemistry is one of the five keys to successful pool care and sometimes the trickiest part of the whole routine. Knowing what things are the biggest influences will help clue you in on when to take action.The biggest influence is, of course, having people in the pool. Swimmers and their swimwear add things like lotions, sweat, detergents, oils, and other ingredients that challenge levels. Heavy use means it’s time to test and add.Second on the list is weather. Rain, wind and landscape treatments deliver unwanted elements to the water and can quickly throw things off. If Mother Nature or the lawn crew show up, it’s time to test and add.Lastly, other pool care products can throw off the balance. Even products used to treat water balance may change other parameters. For instance, raising alkalinity levels will also cause pH to rise.Planning for extra adjustments will keep you in clearer, better-feeling water. 

Hayward HDF400 Universal HC Series – Dual Fuel 400K Low NOx Heater

The industry’s smallest footprint heater allows replacement of almost any heater in an existing pad with the efficient reliability of the new Universal HC Series dual-fuel technology heater from Hayward®. Built to fit effortlessly with Hayward plumbing adapters, every detail has been thoughtfully engineered with easy drop-in capability in mind—its dual-fuel technology, its adaptive plumbing, its zero wall-clearance design, and more. And it all adds up to a durable, ultra-powerful heater with the industry’s smallest footprint.

How To Keep Your Pool Running Strong

Weekly Pool Maintenance

Thorough pool care will ensure clean and safe water throughout the swimming season. Below are some important steps to include in your weekly pool maintenance routine.

Skim Off Leaves and Debris

A task that should be done daily, skimming is the first step of your weekly maintenance routine.

Use a long-handled leaf skimmer to gather up leaves, insects and any other debris floating on the surface of the pool.

Try to remove debris before it sinks to the bottom of your pool where it becomes difficult to remove and may create stains.

Have trees surrounding your pool? Consider trimming them back to reduce the amount of debris that lands on the water.

Skimming the surface of your pool takes just a few minutes and keeps water looking crystal clear. More importantly, the debris you skim off the top of the water never has a chance to dirty the bottom of your pool or clog up your filtration system.

Brush Sediment from Pool Walls

Algae and small bits of debris can gather on the walls of your pool, as well as pool fixture like ladders and slides.Brush the pool walls and fixtures each week to remove dirt and prevent the spread of algae.

Use a brush to remove dirt that has collected on the sides and bottom of your pool, as well as on ladders, slides and other accessories.

Brush sediment toward the main drain so it can be vacuumed up easily.

Vacuum the Pool

Once the algae and sediment have been brushed from the walls, they can be vacuumed up, along with any other debris that has floated to the bottom of the pool.


Automatic Vacuum

Automatic Suction Pool Cleaners

If you are using an automatic vacuum, you just need to plug in your cleaner, set it in the water and let it work for you! There are three types of automatic pool vacuums: robotic, pressure, and suction.

    • Robotic vacuums are energy-efficient and work separate from your pool’s existing filtration system.
    • Pressure vacuums utilize a pressure line from the filtration system to move around your pool. They require a pool pump and usually an extra booster pump to run.
  • Suction vacuums use the water flow from your filtration system and attach to either a dedicated suction port or skimmer. They are the most affordable option.
Automatic Vacuum


Wish you had a salt water pool? Want to learn how to take care of a salt water pool? You’ve come to the right place! Hayward is an innovator in salt water sanitization and an expert in salt water pool maintenance.

Hayward’s industry leading residential and commercial salt water pool systems turn your pool salt into a self-regenerating supply of pure chlorine for clean, clear, and luxuriously soft pool and spa water. Along with easy maintenance, it’s no wonder so many pool owners are converting their traditional chlorine pools to salt water pools!

Maintaining a Salt Water Pool

To maintain a salt water pool you’ll need to keep your filter, pump, and skimmer clean and in good operating condition. With salt water pools, you must inspect the salt chlorinator cell and replace it when needed. Test regularly for proper water chemistry to maintain clean, clear pool water.

Salt Water Pool Chemistry Tips

Using a salt water pool test strip, test your water for free chlorine, salt, pH levels, total alkalinity, stabilizer, and total hardness. Use our online Water Chemistry Calculator to help make those adjustments and balance your pool water.

Following severe weather or times where the load is increased such as pool parties, be sure to test again to maintain your pool’s water chemistry within proper levels. Once you have tested your pool, balance as needed.

Did You Know?

The salinity level in ocean water is 31,000 ppm, but the level in a salt water pool is much lower — only 3,000ppm. That’s less than the salinity level of human tears!

Common Salt Water Pool Care Concerns

1. What’s the difference between a salt water pool and a traditional chlorinated pool?

In a traditional pool, chlorine is added directly to the pool water. Advancements in the pool industry have led to a simpler and safer alternative. Salt water chlorination is a natural and more convenient sanitization method. Salt is dissolved in the pool and our system converts it into just the right amount of chlorine for clean, clear, and luxuriously soft water.

2. Is a salt water pool easier to maintain?

Yes, a salt water pool is easier to maintain! There’s no need to purchase, store and add chlorine to your pool. Simply add salt and your pool’s salt chlorinator will do all the work of making chlorine. While all pools require chemicals to maintain clean, clear water, salt water pools are more stable than traditional chlorinated pools, so they require fewer chemicals.

3. Is a salt water pool less expensive to maintain?

Yes, a salt water pool has a reduced cost of operation as compared to a traditional chlorinated pool. This cost savings is primarily because chlorine is generated from salt and there is no need to buy chlorine. Additionally, salt water pools require fewer chemicals to keep the water clean and clear.

4. Is a salt water pool, salty?

Not at all! In fact, your pool’s salinity level is about 1/12 of the salinity of the ocean and a drop of water from a salt water pool has less salt than that found in a human tear. In addition, salt water is soft and feels really good on your family’s skin!

5. How much salt does the system require?

Salt Systems work best with approximately 3200 parts per million (ppm) of salt, which is roughly the equivalent to a teaspoon of salt per gallon. However, all Hayward Salt Systems are designed to operate with salt levels anywhere from 2700 ppm to 3400 ppm. When salt levels are outside this range, our various salt systems provide a means (typically an LED light) to alert you to the need to adjust your salt level.

6. What does it mean if my salt water pool is cloudy?

Regardless of pool type, cloudy water is often a sign of a chlorine deficiency or poor filtration and circulation. Be sure to diagnose the issue by checking your pool’s chemistry first and then adjust the chemistry as needed. In a salt water pool, the salt level may be insufficient or there may be a problem with the salt chlorinator. Keep your pool filter clean and run your system so that all the water is turned over once a day.

7. Is it hard to convert a traditional chlorinated pool to a salt water pool?

Not at all! Read our blog How to Convert to a Salt Water Pool for 8 easy steps to a new salt water pool.

Comfort, Convenience, and Cost Savings

Moving from a traditionally chlorinated pool to a luxurious salt water pool has never been easier. Whether you have a small backyard pool or a large commercial swimming pool, you can enjoy the many benefits of salt water swimming pools: comfort, convenience, and cost-savings.

Hayward makes it easy! Visit our Salt Water Pools page for helpful information to get you started and contact your Hayward Dealer for assistance today.

Pentair IntelliFlo VSF Variable Speed Flow Pool Pump 011056


The IntelliFlo VSF pump provides precise flow control, which means increased efficiency, savings and performance. The pump’s innovative design ensures the desired flow rate is maintained, no matter the conditions. Plus, the IntelliFlo VSF pump helps the rest of your equipment perform exactly as it’s meant to—from filters to laminars to waterfalls.

  • Precise flow control for efficiency and performance
  • ENERGY STAR® certified — savings up to 90%*
  • WEF 6.1  THP 3.95
  • This pump is so quiet
  • Save money on your monthly power bill
  • Check your local utility company for rebates
  • Purchase here

Pentairs Winter pool care 5 off-season maintenance tips

This winter has been a wild ride with Mother Nature and after last weekend’s deep freeze, we’re all ready for summer! If you didn’t close your pool this winter, you’re not alone. For many pool owners in areas that winter temperatures don’t typically dip below freezing (and if they do, it doesn’t last long) closing your pool is optional. So if you’re one of those lucky pool owners, don’t forget the off-season or winter maintenance!

Don’t leave out these 5 tips for off-season pool maintenance:

1. Set Alerts for Freezing Temperature

When the temperature drops below freezing, your pump should be running to avoid damage. If you don’t have automation for your pool that will notify you and turn on the pump during freezing conditions, then you should set up weather alerts so you’ll know when freezing temperatures or other severe weather conditions are expected.

Weather alerts can be set up on most mobile devices and desktop computers. When an alert is received, you’ll need to go out and start your pump.

2. Winterize Water Features

Even if you don’t winterize your pool, you should always winterize your water features. These include deck jets, wall fountains, and cascades or waterfalls since the pump and pipes that feed them are more prone to freezing and damages.

3. Keep All Valves Open

It’s important to keep the water in your pool circulating and ensure that all the valves are open, especially if you have a pool with a complex plumbing system and/or an attached spa. Keeping the water flowing through these pipes will help protect against freezing.

So when you’re preparing your pool for winter, don’t forget to check ALL the vacuum lines, cleaner lines and waterfall lines, as well as the skimmers, drains and returns to ensure that all the valves are open.

4. Run the Pool Pump

Running your pool pump isn’t just for freeze protection! It’s for filtration too.

Even though you can reduce filtration to lower energy consumption during the winter months, be cautious not to run the pump too infrequently since circulation is important to keep the pipes and equipment functioning properly.

To reduce energy consumption and maintain your pool properly during the winter, you can use a seasonal timer that automatically reduces run-time during winter months. However, if debris tends to collect in your pool, you should run the pump longer OR if the temperature drops below 35 degrees, you should run the pump for 24 hours to prevent freezing.

5. Maintain Proper Pool Chemistry

Periodically test the water chemistry to make sure your pool has the proper pH, alkalinity, calcium, and cyanuric acid levels. Maintaining proper water chemistry can prevent pool surface staining or scaling, and reduce the amount of work required when you reopen your pool.

Selecting the Proper Pump for Your Pool

Buying and installing a pool is easy; keeping it properly maintained is the difficult part. This is because a pool needs to be treated with care if you want to make sure that it stays with you for longer, and while you may filter the pool cleaners, adjust the pool heaters and replace the pool lights; your pool can still give up on you if you don’t pay attention to the pool pump.

If you want to keep your pool clean, you need to make sure that the filtration of your pool water is done by the best quality pump you can find. A pool pump is responsible for performing the necessary task of circulating the pool’s water through a proper sanitation system so that the water remains clean, free of dirt and without the presence of bacteria and insects.

The pool’s water obviously cannot be replaced every month or so; so you need to make sure that the water in the pool is pristine and germ-free at all times. If a pool isn’t filtered and clean properly, it can clog the pipes and make the water harmful for your health. Your pool water thus, needs to be balanced with the proper chemicals or right salt content if you have a saltwater pool, and then, by using a pump, you can maintain it adequately.

Deciding on the right pump system for your pool relies on several factors. Many quality supplies from companies, such as Hayward, Jandy, Pentair, Polaris and Starite, produce systems which are according to the pool you have. When choosing a pool pump, brush up on your knowledge. Find out how big your pool actually is and select a pump which will work according to it. However, that does not mean that the pool pump needs to be as big as the pool. In addition to wasting energy, a pool pump which is bigger than needed will only cloud the water and damage the filter.

Select a pump which is according to your pool’s capacity, flow rate, resistance and turnover. Getting the right pump will give you cleaner water. Many companies nowadays, have the service of delivering pool accessories to your doorstep when you need them, so if you’ve just become the proud owner of a pool, it is probably best to get in touch with us at PoolSupply4Less.

Also, when you get a pump, remember that you will also need to take care of it. A pump might clean your water and make it stay fresh, but you will have to maintain the pump itself so that it works for a longer time. When buying a pool pump, remember the necessary pool pump accessories and parts, so that if there is ever a time when your pool pump stops working effectively, you can have it fixed right away with the parts you had bought in advance, instead of worrying about a pump part which may take days to arrive.

Having the right pool pump for your pool is highly beneficial. By doing so, not only will you be saving money on any future damages that your pool might incur without the pump, but you will also be extending the longevity of all the other equipment which your pool is using to stay clean and safe for your use.

Preparing the Pool for Your Baby’s First Swim

If your baby loves the water; then there is no time to waste. Water babies are not afraid of anything and will swim with the best of them, but if they’ve just started holding their head straight, it’s probably a good idea to make sure that the pool is well-equipped to make your bundle of joy safe and happy for their first swim.

Although your baby is strong enough to withstand the surprise of their first swim and even love it; as a new parent, you need to make sure that your pool is safe and secure for your baby to splash around in. So what are the first things you should look out for when you’re preparing for your child’s first swim?

Preparing the Pool for Your Baby’s First SwimFirstly, make sure that the water is heated properly. Most people take their babies for their first swim when they’re six months old, but you need to remember that your baby has relatively sensitive skin as compared to older children, which means that their body temperature won’t change gradually like ours, but will have quick fluctuations.

Many people use pool heaters from companies such as Hayward, Pentair, Jandy, Raypak and Sta-Rite to keep the water temperature regulated. If the water is at a proper temperature, than the baby’s body temperature will stay steady, making the water comfortable. Just make sure to keep the water warm, not hot; and with a proper pool heater, the temperature will stay regulated so that your baby doesn’t feel overheated.

Secondly, make sure that your pool is clean. A baby is very sensitive to dust or dirt, and if they haven’t had their complete course of allergy shots yet, they can get a bad reaction. Use a good quality pool filter to pull out all the dust and debris, leaving your pool water clean and pristine. Keep an eye on that pool filter though. If you feel like it isn’t working the way it was before, have it replaced. Nothing is more important than your baby’s health.

Your pool should also be equipped with a good quality pool cleaner from dependable brands such as Kreepy Krauly, SmartPool or Polaris so that it works alongside your pool filters to keep the water clean.

Thirdly, make sure your pool is properly chlorinated. It’s not harmful for your baby to be exposed to chlorine this early so you shouldn’t worry about it. Chlorine is used to keep the water clean because it kills all the bacteria and helps in controlling the algae spread in your pool water. A properly chlorinated pool helps in keeping the walls and the bottom of the pool clean so when you take your baby into the water for the first time, you know they won’t be harmed in any way.

Lastly, make sure you have the necessary safety gear such as a personal flotation device (PFD) which fits your baby perfectly properly and is approved by the U.S. Coast Guard. Make sure the baby has it on at all times so that they can splash around to their heart’s content.

Your baby’s safety and health is your first priority, and with the proper pool equipment, you can make sure that their first swim is a moment you will cherish forever.

Keeping Your Pool Clean

If you have a pool, chances are at one point; you have wished that your pool would perform a miracle and self-clean. Having a pool is a luxury, especially during the summer time. Nothing feels better than coming home after a long hard day at work, shedding off your clothes and jumping into the nice cold water, but what if the pool is dirty? You won’t stand by with a net scooping up debris because you want to cool off.

Getting the right pool cleaner for your pool is essential because not only does it help in keeping the water spick and span, but it’s also good for your health. Swimming in the water with a few leaves might be okay with you, but bacteria which are invisible to the naked eye, can be potentially harmful for you. Dust, dirt and germs are always around us, but with a perfect pool cleaner and some handy tips on how you can keep your pool clean, you can take a swim without worrying about your health.

Pool Cleaner

Pool cleaners from suppliers such as the Hayward, Kreepy Krauly or the Polaris models have been favorites in the pool industry for years. When you go to buy a pool cleaner, don’t just buy one which ‘looks’ like it’ll work. Know the dimensions, depth and details of your pool before making any purchase so that the cleaner doesn’t turn out to be too small or too big for the pool.

Pool cleaners are not just extravagant expenses and when you want a pool without the $100 a month cleaning service, you need the best you can get. With so many companies making high-quality pool cleaners at affordable prices, it’s best to make the right choice.

Pool Filters

Pool filters work like coffee filters. They trap the dirt and allow the water to pass through. A safe swimming pool needs an efficient filter system. When opting for a pool filter, know your brands and the size of the filtration system. Major filtration systems are available in sand, cartridge and diatomaceous earth types, so if you know your pool details, you can get an effective system without worrying about whether it will work.

Pool Safety

Safety is obviously important for any swimming pool. Whether you have children or not, you still need to keep a clean and safe pool, not only because it will help you in the long run but also because a nice clean pool looks good. Having a clean pool means not worrying about germs, algae, or dirt etc, and pool cleaners and filters are specifically designed to keep the water sparkling while maintaining its safety standards.

Most pools have a heavy duty filter and cleaner installed which works periodically to keep the water clean at all times, and it can be really helpful if you don’t have the time to take out the cleaner itself. At the end of the day, you want to unwind and relax, and there is nothing more relaxing than wading into the crystal clear water of your private pool and feeling the comforting chill surround you and take away all your achiness.