So you bit the bullet and had a Jacuzzi built in when you were having your swimming pool installed, and now you have no idea how you’re going to take care of it. There’s no need to worry.
A Jacuzzi or a hot tub is like a pet which will dirty itself if it is not taken care of. Most people who have hot tubs usually have someone else to take care of it, but since not all of us have the time to hire the neighbor’s kid to take care of our backyard, here are some tips for the beginners who are in a panic over having their very first hot tub.
Tip#1 Keep it clean
This one is a given. All bodies of water need to be cleaned at intervals. Hot tubs are basically full of bubbling hot water but that doesn’t mean they’ll be boiling out the germs. Hot water is more likely to gather germs because bacteria usually look for a hot place to settle. Hot tubs are fitted with a filter to keep the water clean and odor free. Companies such as Sta-Rite and Hayward make hot tub filters which are of high-quality and affordable so you don’t have to worry about them conking out after a few weeks.
Also remember to drain out your hot tub every three months. Although the water chemicals and installed filters do keep the hot tub clean and safe, it won’t harm you if you drain it out and refill the water every three months, just to stay on the safe side.
Tip#2 Understand your hot tub chemistry
A hot tub isn’t filled with plain water only. Just like your pool, your hot tub needs to have the right amount of chemicals to keep the water fresh and odor free. Most hot tub owners use chlorine to sanitize their tubs from bacteria and algae growth, and using equipment such as the hot tub “Spa Saltwater System” can greatly reduce your hot tub problems. You also need to keep the chemicals properly balanced with your water content, so keep an eye on the chlorine along with the alkalinity and pH levels of the water.
Another tip is to always pour the chemicals after you’ve filled in the water, never before. This allows proper water balance. Having a good chlorine chemical feeder will keep the water chemistry steady, so you will not have to worry about bacteria.
Tip#3 Keep an eye on the heat
Having a good quality hot tub heater is a must. Most heaters from companies such as Hayward are affordable and can be placed near your tub. Proper heat means comfortable water. A pool or spa heater is programmed not to let the temperature go above 102 degrees, and with a reliable and good quality thermostat, your hot tub will be warm and not just tolerable.
A hot tub is a luxury and should be treated as such, and by using extra precautions to keep the water clean and the chemicals balanced, you can enjoy the wonderful and soothing waters of your hot tub after a hard day’s work.